Powered Studio Monitor (pair)
Advancing absolute realism.
With the airmotiv 6, you really can have it all. Precision-matched drivers and 210 watts of power per channel combine to deliver absolute realism for your most demanding creations. Bass impact, high-end extension, detail retrieval, control and dynamics--by all measures the airmotiv 6 sets new standards. You'll quickly decide to put these monitors center stage at your studio or home.
Designed for Demanding Studio and Home Applications
The airmotiv 6 was designed for applications that demand accurate full range sound, exceedingly low distortion, great imaging, and consistent performance. The airmotiv 6 is equally at home in a professional recording studio or in a top notch home studio, and can also be used directly with a DAC, preamp, or surround processor to create a truly impressive small audiophile system or a great home-theater setup.
Superior Transducer Technology with Precision Matching
Our exclusive airmotiv high-frequency transducer provides crystal clear, extended highs--even extending comfortably above the range of human hearing. At the same time, a powerful, precision-engineered airmotiv low-frequency transducer delivers crisp solid bass without any of the thinness or thump that plague other small speakers.
The high-frequency gain, low-frequency gain, and overall gain of each unit are calibrated to within 1.0 dB of our reference standard, which allows every pair to deliver stunning imaging and pinpoint placement of instruments in the sound stage, and ensures that any units you buy in the future will be an exact match for the ones you already have.
Bi-Amplified, Full-Featured Powerhouse
All of our airmotiv monitors are fully bi-amplified, with a separate amp for both the woofer and high-frequency transducer. The airmotiv 6s offer 210 watts per channel of power. Each amplifier is audiophile-grade, with toroid transformer, large electrolytic power capacitors, and stacked metalized film capacitors used throughout.
Plus, we haven't skimped on the features. Use either balanced or unbalanced inputs, tweak the response to your studio or room with active crossover controls, enjoy the convenience of 115V/230V user-switchable AC power, and relax with the confidence of full overdrive protection.
- As a monitor in a professional studio or high-end home studio
- Directly with a DAC or preamp in a mid-sized audiophile system
- As a main speaker (with a sub-woofer) in a high-end audiophile system
- As a main speaker for a small high-end surround sound system
- As a main or surround speaker in an audiophile home-theater system
Airmotiv 6 Owner's Manual (PDF)
- Frequency Response
43 Hz to 23 kHz +/- 1.7 dB
40 Hz to 26 kHz +0 / -6 dB
- Input Connectors
One single ended (RCA)
One professional balanced (XLR)
- Bass Alignment
Single rear-oriented port (slot loaded)
- Power Source
120 VAC 50/60 Hz +/- 10% or
230 VAC 50/60 Hz +/- 10%
IEC standard removable power cord
- Driver Complement
One 32 x 60 mm airmotiv high-frequency folded-ribbon transducer
One 165 mm (6.5 inch) airmotiv low-frequency transducer with Curv® polypropolene composite cone structure
Total amplifier power: 210 watts RMS
100 watts RMS; S/N > 100 dB;
THD+N < 0.05% @ 20W, 10 kHz
110 watts RMS; S/N > 100 dB;
THD+N < 0.05% @ 100W, 100 Hz
- Adjustments and Calibrations
High frequency tilt control:
4 kHz hinge frequency; 0 (calibrated),
+2 dB, -2 dB @ 20 kHz
Low frequency shelving control:
150 Hz turnover frequency; 0 (calibrated),
-2 dB, -4 dB @ 20 Hz
- HF gain, LF gain, and overall gain calibrated to standard within 1.0 dB
Precision multi-pole phase compensated fully active crossover
Crossover frequency: 2500 Hz
The airmotiv 6 has mounting points on the bottom for use with our (optional) mounting bracket.
- Size (each)
340 mm high x 214 mm wide x 286 mm deep
(13.4" high x 8.4" wide x 11.3" deep)
- Size (pair, packaged)
415 mm long x 340 mm wide x 485 mm high
(16.3" high x 13.4" wide x 19.1" high)
- Weight (net):
24.25 lbs. (11 kg) each
- Weight (packaged):
29.5 lbs. (13.4 kg) each